bristol, pa 19007-6810 usa tel (215) 781-9956 ? fax (215) 781-9845 printouts of this document may be out of date and should be considered uncontrolled ? info@arieselec.com www.arieselec.com features ? converts plcc packaged ic-to-dip footprints ? ideal for prototyping and testing/evaluation ? available with plcc sockets or plcc pads on top side ? consult factory for panelized form or for mounting of consigned ics general specifications ? adapter body: 0.062 [1.58] thick, fr-4 with 1-oz. cu traces ? pins: brass 360 1/2-hard per uns c36000, astm b16/b16m ? pin plating: sn/pb 93/7 per astm b579-73 over 100 [2.54] ni per sae- ams-qq-n-290 ? optional plcc sockets: ul 94v-0 pps ? socket contacts: phosphor bronze ? socket contact plating: 200 [5.08] sn/pb 93/7 per astm b579-73 over 50 [1.27] ni per sae ams-qq-290 ? current rating: 1 amp ? operating temperature: 221f [105c] mounting considerations ? suggested pcb hole size : 0.028 0.003 [0.71 0.08] dia. ? will plug into standard ic socket ? see table for pad layout when mounting plcc socket 18015 rev. aa series 352000 and 353000 plcc-to-dip adapter no. of pins 20, 28 series 352000: without socket 353000: with socket ordering information xx - 35x000 - 10 sn-plated solder tail pin pins dim. a dim. b dim. c dim. d dim. w 0.003 [0.08] non-cumulative dim. x 0.003 [0.08] non-cumulative dim y 0.003 [0.08] dim. z 0.003 [0.08] pad size 20 1.000 [25.4] 0.900 [22.86] 0.500 [12.7] 0.500 [12.7] 0.200 [5.08] 0.200 [5.08] 0.350 [8.89] 0.350 [8.89] 0.024 x 0.076 [ 0.61 x 1.93] 28 1.400 [35.56] 1.300 [33.02] 0.705 [17.91] 0.705 [17.91] 0.300 [7.62] 0.300 [7.62] 0.549 [13.95] 0.449 [11.41] 0.024 x 0.076 [0.61 x 1.93] customization : in addition to the standard products shown on this page, aries specializes in custom design and production. special materials, platings, sizes, and configurations can be furnished, depending on the quantity. note : aries reserves the right to change product general specifications without notice. all dimensions: inches [millimeters] all tolerances: 0.005 [0.13] unless otherwise specified consult factory for other sizes and configurations
|